|
ADC-20/ADC-24 Channels |
|
|
This dialog box is used to select the channels that will be used to take measurements. To access it, first set up PicoLog with a High-Resolution Data Logger as your converter, then select Input channels... from the Settings menu.
Status. If an even-numbered analog channel is being used in conjunction with its corresponding odd-numbered channel to form a differential input pair, its status will be shown as 'Unavailable'. If your data logger unit has digital input channels, you will see them listed below the analog channels. If a digital channel is being used as an alarm output, it will be unavailable for use as an input. Edit. To select a channel, highlight it and click Edit... This will open the Edit ADC-20 Channel, Edit ADC-24 Channel or ADC-24 Digital Channels dialog box so that you can enter the details. Disable. To disable a previously selected channel, highlight it and click Disable. Mains frequency. Click either the 50Hz or 60Hz radio button to indicate your local mains (grid) frequency. PicoLog uses this information to reduce mains noise on your signals. |
